The DES 16MX splittable frames family is a modular solution for installations where a big quantity of cables need to be routed through electrical cabinets walls or machines.
This solution is not only modular but it is also a general solution that can be adopted as main cables entrance.
Both cables with or without connector can be routed (32 for each module) and future updates can easily be organized in the cheapest and fastest way.
| Model | Code | Max. opening [mm] | Opening Ø [mm] | Cable Ø max. [mm] | Dimensions A | Size B | Size C | Dimensions H | Dimensions [mm] | Dimensions [mm] Cut-out | Dimensions [mm] Cut-out A1xA2 | Dimensions [mm] | Dimensions [mm] L1xL2 | Dimensions Ø P [mm] | Thread | No. cables - Ø cables [mm] | Hole Ø | Clamping range [mm] | Notes | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Model | Code | Max. opening [mm] | Opening Ø [mm] | Cable Ø max. [mm] | Dimensions A | Size B | Size C | Dimensions H | Dimensions [mm] | Dimensions [mm] Cut-out | Dimensions [mm] Cut-out A1xA2 | Dimensions [mm] | Dimensions [mm] L1xL2 | Dimensions Ø P [mm] | Thread | No. cables - Ø cables [mm] | Hole Ø | Clamping range [mm] | Notes | |
| Model | Code | Max. opening [mm] | Opening Ø [mm] | Cable Ø max. [mm] | Dimensions A | Size B | Size C | Dimensions H | Dimensions [mm] | Dimensions [mm] Cut-out | Dimensions [mm] Cut-out A1xA2 | Dimensions [mm] | Dimensions [mm] L1xL2 | Dimensions Ø P [mm] | Thread | No. cables - Ø cables [mm] | Hole Ø | Clamping range [mm] | Notes | |
| DES 16 MX2 | 1731010262 | 86 x 92 | 120 x 115 | 120 x 115 | 120 x 115 | |||||||||||||||
| DES 16 MX3 | 1731010263 | 86 x 144 | 120 x 167 | 120 x 167 | 120 x 167 | |||||||||||||||
| DES 16 MX4 | 1731010264 | 86 x 196 | 120 x 219 | 120 x 219 | 120 x 219 |
The DES cable grommet system is the ideal solution for cable management by allowing the routing of headed cables, pre-wired cables, connected cables and corrugated tuebs inside electrical panels, electrical equipment and machines. Thanks to the openable grommets it is possible to accommodate a large number of cables of several diameters in the same frame. This is possible thanks to a DetasUltra patent that allows the grommets to be positioned and slide freely within the frame. It will thus be possible, for example, to run multiple types of headed and unheaded cables, corrugated conduits and others through the same frame. The frame includes two V2A (SS304) steel screws and two nuts overmolded into the piece also made of steel but with a black geomet finish.
The DES splittable frames product family is made of chemically bonded glass fibre reinforced polypropylene, specifically designed for applications requiring high rigidity and mechanical resistance even at high temperatures. The chemical bond between Polypropylene and glass fibre guarantees high impact resistance, improved mechanical properties and greater resistance to detergents and chemical agents.
Fastening of the grommet strip to the board or panel is done with screws or rivets. Upon request, we supply screws for fastening, again made of stainless steel but with a black geomet finish. Alternatively, you can use the "Snap" quick coupler for greater mounting flexibility.
