MSFD
The MSFD shielding clamps allow the cable shield to be grounded easily and effectively thanks to the spring that exerts constant pressure on the cable braid.
Surface finishing protects the device from corrosion and increases wear resistance
-
-
No items found.
| Model | Code | Max. opening [mm] | Opening Ø [mm] | Cable Ø max. [mm] | Dimensions A | Size B | Size C | Dimensions H | Dimensions [mm] | Dimensions [mm] Cut-out | Dimensions [mm] Cut-out A1xA2 | Dimensions [mm] | Dimensions [mm] L1xL2 | Dimensions Ø P [mm] | Thread | No. cables - Ø cables [mm] | Hole Ø | Clamping range [mm] | Notes | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Model | Code | Max. opening [mm] | Opening Ø [mm] | Cable Ø max. [mm] | Dimensions A | Size B | Size C | Dimensions H | Dimensions [mm] | Dimensions [mm] Cut-out | Dimensions [mm] Cut-out A1xA2 | Dimensions [mm] | Dimensions [mm] L1xL2 | Dimensions Ø P [mm] | Thread | No. cables - Ø cables [mm] | Hole Ø | Clamping range [mm] | Notes | |
| Model | Code | Max. opening [mm] | Opening Ø [mm] | Cable Ø max. [mm] | Dimensions A | Size B | Size C | Dimensions H | Dimensions [mm] | Dimensions [mm] Cut-out | Dimensions [mm] Cut-out A1xA2 | Dimensions [mm] | Dimensions [mm] L1xL2 | Dimensions Ø P [mm] | Thread | No. cables - Ø cables [mm] | Hole Ø | Clamping range [mm] | Notes | |
| Model | Code | Max. opening [mm] | Opening Ø [mm] | Cable Ø max. [mm] | Dimensions A | Size B | Size C | Dimensions H | Dimensions [mm] | Dimensions [mm] Cut-out | Dimensions [mm] Cut-out A1xA2 | Dimensions [mm] | Dimensions [mm] L1xL2 | Dimensions Ø P [mm] | Thread | No. cables - Ø cables [mm] | Hole Ø | Clamping range [mm] | Notes | |
| MSFD 3-8 | 1734020310 | |||||||||||||||||||
| MSFD 4-13,5 | 1734020320 | |||||||||||||||||||
| MSFD 10-20 | 1734020330 | |||||||||||||||||||
| MSFD 15-32 | 1734020340 |
- For cables with diameters from 3 to 32 mm
- With base for DIN omega rail
- Constant clamp pressure on the cable shielding for the best EMC solution.
- Material:Galvanized spring steel
No items found.
MS Series EMC cable clamps
The interconnecting cables between equipments inside electrical panels or machinery are the main way how the interference (EMI) propagates into the external environment surrounding the equipment. A classic example is frequency converters and their connectors.
It is well known that the contribution of the cable to the overall EMC performance of the system is critical. The effectiveness of the shielding can often be compromised by cables with poor EMI protection characteristics. The importance of cable shielding is one of the key factors in avoiding loss of EMI performance of the overall system.
MS Series shileding clamps are the important EMC solution for the performance of the electrical system without disturbances.
A variety of fixing options within the electrical cabinet or equipment allows the best and most efficient solution to be found.
The wide choice of models and low cost make these cable shielding systems very attractive and easy to install.