Receive files by email
The requested files have been sent to your email.
An error has occurred. Please try again.

Cable entry plates for cables without connectors

PDM Cable Entry Plates

DES PDM 24 FT
-
-
No items found.

DES PDM 24 FT

DES PDM 24 FT cable entry plates are an economical and reliable alternative to standard industrial cable glands.

After lightly drilling the front membrane, the required size cable is pushed through the wall where the second membrane allows for a greater mechanical and fluidic seal. They are equipped with threaded M4 screw inserts and front end caps, which allow mounting from the rear of the frame and keep the product frontally clean, preventing dirt from settling in the screw seats.

"UL Recognised Component" Mark
UL Type 4X classification*
NEMA 4X* classification
EN 45545-2 lv. HL3
Lloyd's Register
ECOLAB certification
Flammability class UL 94 V-0
EU RoHS legislation
Resistance to atmospheric agents
ATEX certification
Models
Properties
Compatible grommets
Configurator
Download
Model No. of cables - ø cables min/max [mm] Code
DES-PDM 24 3G FT 3 - 18/26 1732212403
DES-PDM 24 12G FT 12 - 9/16 1732212412
DES-PDM 24 14G FT 10 - 2.8/6.5
4 - 14.5/22		 1732212414
DES-PDM 24 15G FT 15 - 6.8/12 1732212415
DES-PDM 24 16G FT 8 - 2.8/6.5
4 - 4.4/9.7
2 - 8.6/16.2
2 - 14.5/22		 1732212416
DES-PDM 24 17G FT 6 - 2.8/6.5
6 - 4.6/10.2
5 - 8.6/16.2		 1732212417
DES-PDM 24 25G FT 12 - 2.8/6.5
7 - 4.4/9.7
6 - 6.8/12		 1732212425
DES-PDM 24 26G FT 26 - 4/10 1732212426
DES-PDM 24 32G FT 21 - 2.8/6.5
8 - 4.6/10.2
3 - 6.8/12		 1732212432
DES-PDM 24 42G FT 42 - 2.8/6.5 1732212442
  • Internal fixing with threaded inserts for M4 screws screws
  • Front end caps to prevent dirt accumulation
  • For large number cables without connectors
  • High strain relief thanks to the double membrane
  • Cost efficient solution
  • Material: TPE
  • Flammability: UL94-V0, self-extinguishing
  • Temperature: -40°C... +110°C (static)
  • Features: Resistant to the most common elements in an industrial environment (including cleaning agents and salt); halogen-free, silicone-free
No items found.
Catalog page
Catalog page
Catalog page
Catalog page
Catalog page
Catalog page
Instructions (.pdf)
Cut-out (.dxf)
Data sheet (.pdf)
Download CAD

DES PDM 24

Plates made of elastomeric material are used for the routing of electrical cables or compressed air cables and are an economical alternative to conventional cable glands. The choice of model is based on the number and diameters of unterminated cables or compressed air cables. This model is particularly suitable for compacting the number of cables to be routed through. The aesthetics of the device also benefit. The PDM series is particularly suitable for the routing of a large number of cables without connectors with big diameters thanks to the internal reinforcement of insulating material.

The assembly time is therefore considerably shorter compared to cable glands. Watertightness and strain relief function are at high standards thanks to the parallel double membrane used by all DES PDM cable gland series. The choice of colour can be between classic grey or black. For both versions self-extinguishing according to UL94V0 is guaranteed.